How to pick an offshore development partner
A buyer's guide to choosing an offshore development partner: engagement models, overlap hours, IP terms, real cost drivers and when to say no.
Founder, Viithiisys

An offshore team runs people you do not sit next to
To pick an offshore development partner, check four things before you compare prices. Check that the working hours overlap with yours. Check that a named person on each side owns the outcome. Check that the IP and security terms are in writing. Check the vendor with a small paid piece of work before you commit. The sections below take each in turn.
An offshore development partner is an outside company that employs engineers in another country and takes responsibility for delivering your software with them. You contract with the company, not with the individuals.

The company hires, manages, replaces and pays the people. You get a team and, if the contract is written well, a named person accountable for the result.
We sell this service, so weigh what follows accordingly. Viithiisys has been doing it since 2007, with engineering in Mohali in the Chandigarh tricity, an office in Markham, Ontario, and clients in the US, UK, Canada, India, China and Nigeria. The drawbacks get their own section below, because a guide that skips them is a brochure.
The risk is paying for hours and finding nobody owned the outcome
The risk a buyer actually carries is that, six months in, the team has delivered tickets and nobody can say whether the product works. The invoices were correct. The result was not.
Here is a hypothetical. A SaaS founder adds five engineers through a vendor. The vendor staffs them, the founder writes the tickets, and every sprint closes green.
Then a customer-facing workflow turns out to fail on a case nobody wrote a ticket for. The vendor delivered what was asked. The founder owns the consequence.
Everything later in this guide is a way of moving that ownership to a named person before the work starts.

Four engagement models, and who carries the risk in each
The model you choose decides who holds the risk. Staff augmentation puts it on you. A dedicated team shares it: you set priorities and the vendor manages delivery. A fixed-scope project puts most of it on the vendor. A captive team, often called a GCC, starts under the vendor's care and moves toward your ownership. The right one depends on how well you can specify the work and how long you expect to keep the team.
The table sets the four side by side.
| Model | You manage | The vendor carries | Fits when |
|---|---|---|---|
| Staff augmentation | Everything: priorities, review, quality | Hiring and payroll | You have a strong engineering lead and need hands |
| Dedicated team | Priorities and acceptance | Delivery management, replacement of people | Roadmap is clear, scope will change |
| Fixed-scope project | Scope sign-off | Delivery against the agreed scope | Scope is stable and can be written down |
| Captive team (GCC) | Direction; you may later own the entity | Setup, hiring, compliance in the early phase | You expect to keep the team for years |
Our Moonship offer is the fixed-scope end: a working MVP in 30 days against a scope agreed up front, for work that fits that scope. The Moonship MVP page sets out what the scope covers and what it leaves out, and our case studies show delivered work.
Overlap hours decide more than rates do
Overlap is the number of working hours you and the team share each day. It sets how fast a blocked question gets answered, and no hourly rate offsets a question that waits a night.
India Standard Time is UTC+5:30. The US East Coast is 9.5 or 10.5 hours behind, depending on daylight saving, and the West Coast 12.5 or 13.5. The UK is 4.5 or 5.5 hours behind India.
For a US East team, take a Mohali engineer working roughly 12:00 to 21:00 IST and a 09:00 to 12:00 Eastern morning on your side. In daylight time (EDT) that shift runs 02:30 to 11:30 Eastern, so you share 2.5 hours. In standard time (EST) it runs 01:30 to 10:30 Eastern, so you share only 1.5 hours. Moving the engineer's day to 14:00 to 23:00 IST gives you the full three hours in both periods. The UK needs no shift at all.
Write the window into the contract. Name who must be reachable in it, and what happens when they are not.
Put a senior owner on each side of the table
A workable operating model has two named owners: one at the vendor accountable for delivery, and one on your side accountable for priorities. Everyone else can change. These two cannot.
On the vendor side that is a tech lead who reads every pull request that touches shared code. On yours it is a product owner who answers within the working day.
A cadence that holds up in practice: a short written standup each morning, a live call in the overlap window, a demo every week or two, and pull request review inside one working day. None of this is clever. It works because it is written down and nobody has to remember it.
If the vendor cannot name the tech lead before you sign, that tells you how staffing will go afterwards.
Get IP and security terms in writing before the first commit
Your contract should assign IP to you, and the work should live in repositories and cloud accounts you control. That makes ownership a fact of the setup rather than a point to argue later.
Ask for these specifically:
- A written IP assignment that covers work in progress, plus a clause on any code the vendor reuses from earlier projects.
- Access through your own SSO, with accounts removed the day a person leaves the team.
- A security baseline you can name. The NIST Secure Software Development Framework, SP 800-218, is a reasonable reference for secure development practice.
- If the vendor claims ISO/IEC 27001, ask which office and which services the certificate covers.
Hold us to the same question. We have not published an ISO/IEC 27001 certificate scope on this page, so ask us for the current scope in writing and do not rely on a claim you cannot read.
If personal data of people in India is involved, India's Digital Personal Data Protection Act, 2023 applies too.
Does cheaper per hour mean cheaper per project?
Not always. This is the drawback most readers already suspect, so here it is plainly: offshore hourly cost is lower, but total cost depends on how much rework, waiting and management time the distance creates.
Distance adds friction. Context is lost in handoffs, questions wait across time zones, and a team that has never met your customers builds from documents alone. Someone on your side spends hours every week on review and clarification.
Buyers disagree about how much this matters. Some argue that the friction is a tax that cancels the rate gap on small or fast-moving work. Others find that it shrinks once a team has run together for a few months.
Both are right in different situations. Expect a slower first month than an in-house hire, and budget your own time for it.

Do not offshore a product nobody can specify
The answer is no when the product cannot yet be described well enough for a stranger to build it, or when nobody on your side can review the result.
Three signs, which you can check this week. You cannot write the acceptance test for the next feature. Your priorities change every few days. Nobody in your company can read a pull request.
In each case the problem sits on your side of the contract, and a vendor cannot fix it by being better.
The answer is also no for a one-week fix. Onboarding an offshore team has a fixed cost in your time. A local contractor finishes small work before the offshore team has finished reading the repository.
If you are early and unsure what to build, hire a fractional CTO first and let them write the specification.
India wins on depth of experience and on the working day
Where India wins is the combination of a deep pool of experienced engineers, a long history of serving Western clients, and a working day that lets the team ship while you sleep.
On depth: by our own count, Mohali has supplied engineering to Paytm, Snapdeal, IKEA, Nestle, Shiprocket and Vikram Solar through our own work, across 500+ projects since 2007. That is a track record you can ask a reference about, and it covers large consumer platforms as well as small products.
On the working day: with a defined handoff, a US team can review at the start of its morning what was built overnight. That only works if the handoff note is good, so write one.
India is not the right answer for every case. If your work needs in-person access to hardware or to regulated sites, or live pairing all day, a nearer location does better.
A cheaper hourly rate buys you nothing until someone owns the outcome.
What the price comes from: five drivers
You will not get a trustworthy figure from a blog post, including ours. Offshore cost depends on five drivers, and you should ask the vendor about each:
- Scope: What exactly is included, and what happens to the price when scope changes?
- Seniority: What seniority mix is in the quoted team?
- Team size: How many people are on the quote, and how many are full time?
- Duration: What is the minimum term, and what does it cost to end early?
- Your own time: How many hours a week of review and decisions does the vendor expect from you?
For a market reference, the US Bureau of Labor Statistics publishes median pay for software developers on its Occupational Outlook page. That is the in-house benchmark to compare against, with benefits and recruiting on top.
On our side, work is scoped per project after a discovery call. A Moonship build is a fixed scope, and fractional leadership is on a fractional basis.
Ask every vendor the same questions, and add one more: who pays for the replacement when someone leaves? Compare answers, not totals.
A vendor cannot fix what you owe the team
A good vendor cannot do your side of the work. You still owe the team decisions, access, a written definition of done and review time, and delivery slows wherever one of those is missing.
Concretely, that means:
- Someone with authority answers product questions inside a day.
- The team gets staging environments, test data and credentials in week one.
- Acceptance criteria exist before a feature starts.
- A person on your side reads the code that goes into your main branch.
Skipping the last one is the commonest failure. Quality assurance can be a shared job, and our QA and testing service is one way to cover it, but accountability for the product stays with you.
Budget some of your own engineering time for this, every week, for as long as the engagement runs.
Check the vendor with a small paid piece of work
The best evaluation is a short, paid, real piece of work. Reference calls and case studies are curated: the vendor chooses which projects and which contacts you hear from, so they skew toward the engagements that went well. A small build shows how they behave when nobody has picked the audience.
Pick something bounded: one integration, one internal tool, one workflow. Judge it on how questions were asked, how the pull requests read, and how the vendor behaved when a requirement turned out to be wrong.
Then call two references, and ask what went wrong and how it was handled. Ask us for reference contacts the same way, and start with our case studies to see which projects they come from. Anyone who says nothing went wrong is not describing a real project.
Ask what was not written up in those case studies. For broader build capacity, the custom software development page lists what a team can take on.
A nano-GCC is the smaller step before a full captive team
Many buyers want the control of a captive team without the setup of one. A nano-GCC is a small, dedicated group of engineers working as an extension of your company, scoped around your needs.
It sits between a dedicated team and a full global capability centre. The team is yours in practice, with direction, tools and reviews on your side, while the vendor handles hiring, space and compliance at first. Whether it later moves to a captive entity you own is a decision you can leave open.
The size, roles and duration are scoped after a discovery call, not read off a rate card. Discussion starts with what your team needs to ship.
Before you choose any of these shapes, it helps to know whether the problem is a team at all. If you have a workflow that keeps getting stuck, whether a process, a handoff or an integration, send us the workflow that gets stuck. We will tell you whether it is a job for an offshore team, an automation, or neither. If you would rather talk first, the contact form goes to the same people.
Sources
- US Bureau of Labor Statistics, Occupational Outlook Handbook: Software Developers.
- NIST, SP 800-218, Secure Software Development Framework.
- ISO, ISO/IEC 27001 information security management.
- Government of India, MeitY, Digital Personal Data Protection Act, 2023.
FAQ
- What is an offshore development partner?
- An offshore development partner is a company that employs engineers in another country and takes contractual responsibility for delivering your software with them. You contract with the company, which handles hiring, management and replacement, rather than with individual developers.
- How much overlap do I need with an offshore team?
- Two to three shared working hours a day is enough for most teams, if the rest of the work is written down and reviewed asynchronously. Less than that and decisions queue overnight. Agree the overlap window in the contract, with a named person responsible for being available in it.
- Who owns the code an offshore partner writes?
- You should. The contract needs a written assignment of IP to you on creation or payment, work done in repositories and cloud accounts you own, and a clause covering anything the vendor reuses from earlier projects. Check this before signing, not after a dispute.
- When should I not hire an offshore partner?
- Skip it when the product cannot yet be specified, when nobody on your side can review code or make product decisions, or when the work is a small fix that a local contractor finishes in a week. Offshore teams need direction to be worth the distance.